Part # 259752008 Ford Super Duty F250 / F3505” Suspension systemPart#Description Qty.24970-CL01 Front coil springs 224970-10 DS & PS bump stop rel
Photo # 7Photo # 8Photo # 9Photo # 10Photo # 11Photo # 12
Photo # 13Photo # 14Photo # 15Photo # 16Photo # 17Photo # 18
Photo # 19Photo # 20Photo # 21Photo # 22Photo # 23Photo # 24
Photo # 25Photo # 26Photo # 27Photo # 28Photo # 29Photo # 30
Photo # 31Photo # 32Photo # 33Photo # 34Photo # 35Photo # 36
Photo # 37Photo # 38Photo # 39Photo # 40Photo # 41Photo # 42
Photo # 43Photo # 44Photo # 45Photo # 46Photo # 47Photo # 48
Photo # 49Photo # 50Photo # 51Photo # 52Photo # 53Photo # 54
24970-10 (2)DS & PS bump stop relocation bracket24970-14 (1)Rear carrier bearing relocation bracket25975-01 (1)Front track bar relocation bracket2
Limited lifetime warranty Notice to all Tuff Country EZ-Ride Suspensioncustomers: It is your responsibility to keep youroriginal sales receipt! If fai
Hardware bag 25975NB includes:DescriptionQuantity7/16” x 1” bolts 43/8” USS flat washers 107/16” unitorque nuts 45/16” x 1” bolts 41/4” USS flat washe
Photo # 76. Working on the driver side, remove the stock lower brakeline bracket from the stock front axle. Save the stock hard-ware for later re-inst
cup from the bottom of the stock frame rail and save thestock bump stop cup and the stock hardware for later re-installation. Repeat procedure on the
34. Locate the stock lower shock mounting hardware thatwas removed in step # 11. Locate (2) PB8297 upper shockbushings and (2) S10107 upper shock wash
again.50. Install the tires and wheels and carefully lower the vehi-cle to the ground.Rear end installation:51. To begin installation, block the front
ware. Torque to 28 ft lbs. Repeat procedure on the passen-ger side.Special note: If the vehicle that you are working has a 1piece rear drive shaft, pl
Photo # 1Photo # 2Photo # 3Photo # 4Photo # 5Photo # 6
Commentaires sur ces manuels